
VIVOSUN 260GPH Submersible Water Pump
Compact 260GPH submersible pump with adjustable flow — a workhorse for reservoirs, drainage and hydro systems.
Water storage and control, in one place: hydroponic reservoirs from 20 to 275 gallons with fitted lids, food-grade barrels and collapsible tanks, the float valves and auto top-off kits that keep levels steady while you are away, bulkheads and Uniseals for leak-free plumbing — plus the pond side of the shelf: EPDM liners, waterfall pumps, aeration kits and UV clarifiers for growers running outdoor water.
71 items · prices and stock live at Amazon — tap Show deal to check today's price. Full category: Watering & Irrigation

Compact 260GPH submersible pump with adjustable flow — a workhorse for reservoirs, drainage and hydro systems.

The bigger sibling: 800GPH for large reservoirs, fast drain-downs and strong circulation.

Reservoir and transfer pump sized for small hydro and hand-watering wands.

Bigger transfer pump for RDWC circulation and fast reservoir changes.

Two-outlet air pump kit with stones and airline — a DWC bucket's life support.

Four-outlet pump for multi-bucket DWC and RDWC systems.

Catch roof water for the garden. Spigot fits a standard hose; overflow diverts the excess.

Hold DWC reservoirs at 65-68F — the root-rot prevention machine.

Low, wide, light-proof reservoir that fits under tables and benches.

Mechanical float that keeps a reservoir at level from an RO line. Set and forget.

The hydro-shop standard mid-size pump — reservoirs, chillers and transfers.

Another shop-standard pump size for flood tables and DWC circulation.

Low, wide 40-gallon reservoir that slides under flood tables.

Folds-flat water tank for tight rooms — a reservoir that stores in a drawer.

Click-on brass couplers — swap wands, sprinklers and lines in seconds, leak-free.

Move water fast: flooded trays, big reservoir changes, rain barrels in a storm.

Fine screens that keep mosquitoes and roof grit out of stored water.

All-stainless float valve that shuts off the incoming line when the tank reaches your set level. Bend or slide the arm to fine-tune fill height in reservoirs, stock tanks and auto-fill sumps.

Complete through-wall mounting kit with bulkhead fitting, stainless rod and float ball included. Built for retrofitting plastic tanks and barrels that have no factory fill port.

Seals shut using water pressure alone, so there is no arm or ball for lids and covers to snag on. A long-running favorite for stock tanks, reservoirs and unattended auto-fill lines.

Compact 1/4 in push-fit float valve sized for sumps and top-off jugs fed by an RO line. Small footprint fits tight reservoir corners where a full-size valve will not.

Three-piece kit that stops an RO system from running to drain once the storage tank is full. The automatic shut-off valve, float and check valve work together to cut water waste.

Plug your pump into the piggyback outlet and the tethered float starts and stops it as water rises and falls. The hands-free way to run transfer and drain pumps without watching the tank.

Small reed-style float switch that mounts through a tank wall or lid and reports high or low level to a controller or alarm. Runs on low voltage, so it pairs safely with DIY monitoring gear.

Battery-powered alarm that sounds the moment water climbs past the float, long before a reservoir or sump overflows onto the floor. Cheap insurance for any unattended fill line.

Hooks a standard garden hose to a float valve so a reservoir tops itself off between visits. Handy for outdoor tanks and greenhouses where a permanent water line is not an option.

Shallow 20 gallon reservoir that slides under benches and low flood tables where taller tanks waste headroom. Molded from durable black plastic that blocks light and slows algae growth.

Wide, low 70 gallon tank for mid-size flood-and-drain and drip systems. The white finish reflects light and heat, helping nutrient solution stay a few degrees cooler.

Full-size 115 gallon reservoir for large tables and multi-light rooms that chew through solution fast. Thick walls and a broad footprint keep it stable even when filled to the brim.

Snap-fit lid matched to the Botanicare 20 gallon low-profile reservoir. Keeps light, dust and debris out of the solution and gives pumps and lines a cleaner pass-through point.

Matching lid for the 70 gallon Botanicare reservoir, sized to sit flush without warping. Blocking light at the top is the simplest algae prevention there is.

Fifty gallon reservoir with slightly tapered sides for easy stacking and storage between runs. A solid mid-size choice for a single 4 x 8 table or a bank of DWC buckets.

Hundred-gallon white reservoir built for commercial-style flood tables and big RDWC systems. The light color makes sediment and biofilm easy to spot during weekly checks.

Folds flat for storage, then pops open into a 100 gallon tank with support poles and a fitted lid. Ideal spare capacity for harvest-week flushes or a temporary mixing station.

Closed-head 55 gallon barrel molded from food-grade HDPE for safe long-term water and nutrient storage. Two bung openings accept standard fittings, pumps and siphons.

A 30 gallon version of the classic storage barrel for growers who do not need a full 55. White walls make it easy to see the water level and spot any sediment at a glance.

Tall, narrow 160 gallon tank designed to stack and to fit through a standard doorway. Doubles as irrigation storage for greenhouses and as household emergency water backup.

Caged 275 gallon intermediate bulk container for serious water storage, rain catchment and bulk nutrient mixing. The 2 in bottom valve drains fast and adapts to camlock and hose fittings.

Pressurized bladder tank that holds filtered RO water ready for instant dispensing. The included ball valve makes swapping it into an existing RO system a five-minute job.

Through-wall fitting that gives tanks, buckets and totes a watertight 1 in pass-through. The silicone gasket seals on flat or gently curved walls without thread tape gymnastics.

Three-quarter inch ABS bulkhead with a threaded side for removable plumbing and a slip side for glued PVC. A staple fitting for RDWC returns and reservoir drains.

Rubber Uniseal that stretches to seal pipe passing through curved barrel and bucket walls where rigid bulkheads leak. Push the 2 in pipe through and it grips tighter under pressure.

Oversized 3 in Uniseal for high-flow drain and return lines on big totes and IBC conversions. No nuts, no silicone, no chasing slow drips around a curved wall.

Matched fill and drain fittings for flood tables, including riser extensions to set your flood height. The screened drain keeps roots and clay pebbles out of the return line.

Low-profile drain that sits nearly flush with the tank floor so almost every drop can be emptied. The 1 in barb connects straight to vinyl tubing for fast change-outs.

Clear sight tube that mounts on the outside of an opaque reservoir and shows the true level at a glance. Elbow fittings and mounting clips are included for a clean install.

Assorted soft rubber grommets for sealing tubing pass-throughs in buckets, lids and reservoir walls. Mixed sizes cover most hydro plumbing jobs without a hardware-store run.

A working assortment of barbed tees, elbows, couplers and end plugs for 1/2 in poly line. Enough variety to replumb a small room or rescue a weekend build.

One-way valve that stops water from siphoning back through the pump when it shuts off. Protects flood tables from draining backward and keeps prime in transfer lines.

Quarter-turn shutoff for isolating reservoirs, bypass loops and drain lines. Glue it in once and future pump swaps and clean-outs stop being a wet job.

Palm-size 160 GPH pump for top-off jugs, small fountains and gentle reservoir circulation. A flow dial on the intake lets you throttle it down for delicate seedlings.

High-output 1200 GPH pump for big reservoirs, fast transfers and long lift heights. The ceramic shaft and wear-resistant impeller hold up to nutrient salts season after season.

Thousand-GPH workhorse from the Active Aqua line, sized for large flood tables and multi-site RDWC. Removable foam filter keeps debris out of the impeller between cleanings.

Draws water from the very bottom of the tank, leaving as little as a few millimeters behind. The pump to reach for when a reservoir or flood tray has to come out truly empty.

Magnetic-drive pond pump built to run around the clock with no oil to leak and few moving parts to wear. The long cord makes placement in ponds and big sumps much easier.

Fish-safe EPDM rubber liner with the stretch to settle into shelves and curves without tearing. Forty-five mil thickness shrugs off roots, rocks and years of UV exposure.

Large-format 45 mil EPDM liner for ponds up to roughly 16 x 21 ft with depth. One seamless sheet means no glued seams to chase leaks through later.

Nonwoven geotextile padding that goes under the liner to cushion it against sharp stones and roots. Cheap protection that dramatically extends pond liner life.

High-flow pump that pushes a convincing waterfall while staying safe for fish and plants. The oil-free motor and large intake screen suit continuous outdoor duty.

Complete aeration package with a rocking-piston style compressor and self-sinking airline that stays on the pond bottom. Two diffusers spread oxygen across mid-size ponds.

Linear air pump delivering 40 liters per minute for koi ponds, big aquariums and multi-bucket DWC. The six-outlet manifold lets you split air exactly where it is needed.

Sealed canister filter that combines mechanical pads, bio media and a UV clarifier to clear green water. Backflush handles make cleaning it a hose-and-go job.

Inline ultraviolet clarifier that zaps free-floating algae as water passes through, restoring visibility in days. A simple add-on when filtration alone cannot keep up.

Floating heater that holds a small hole in the ice so gases can escape and fish survive winter. The thermostat cycles it off above freezing to save power.

Twelve-inch spillway box that builds an even, sheet-like waterfall over rocks and ledges. Included filter pads and a media bag add quiet biological filtration at the top of the falls.

Flexible corrugated hose that bends around pond edges without collapsing or kinking. Smooth enough inside for strong flow from pump to filter or waterfall.

Fifty-foot roll of opaque black vinyl tubing that resists algae by blocking light. The standard line for connecting submersible pumps to tables, chillers and filters.

Soft silicone airline that stays flexible for years instead of hardening like cheap PVC air hose. Standard 1/4 in size fits air pumps, stones and diffusers.

Quarter-horsepower chiller that holds reservoir temperatures in the ideal root-zone range through hot rooms and summer heat waves. Titanium heat exchanger resists nutrient corrosion.

Three-hundred-watt titanium heating element that will not shatter like glass tubes in a working reservoir. The external controller sets and holds temperature without reaching into the water.

Booster pump package that raises low household pressure so RO membranes hit their rated output and waste less water. Includes the pressure switch and transformer for a complete install.